Dishwasher Repairs in Canberra

Dishwasher not draining, leaving dishes dirty, or leaking under the cabinets? We repair freestanding and built-in dishwashers across Canberra and the ACT, with same-day booking wherever we can fit you in.

Our call-out has no time limit — the price of the service call is the same whether the fault takes five minutes or a couple of hours to find. We diagnose on site and quote before any repair goes ahead.

Dishwasher faults we fix

  • Water left in the bottom / won’t drain — blocked filter, drain hose, or a faulty drain pump.
  • Dishes come out dirty or gritty — clogged spray arms, blocked filter, or a weak wash pump.
  • Leaking onto the floor or into the cabinet — door seal, hose, or pump seal failure.
  • Not filling with water — inlet valve or float-switch fault.
  • Not heating or dishes not drying — heating element or thermostat fault.
  • Door won’t latch or won’t stay closed — latch or hinge problem stopping the cycle from starting.
  • Won’t start or stops mid-cycle — control board, door switch, or power fault.
  • Error codes or bad smells — we read the fault and check the drainage and filters.

Brands we service

We repair all makes and models, including Westinghouse, Fisher & Paykel, Bosch, Miele, Samsung, LG, Smeg, Asko, Simpson, Whirlpool, General Electric and Kelvinator — plus every other brand and make.

Why Canberra chooses us for dishwasher repairs

  • Freestanding and built-in dishwashers, all brands and makes.
  • Same-day and next-day bookings across the ACT.
  • Flat service-call pricing with no time limit on the diagnosis.
  • Domestic and commercial dishwashers and glasswashers.
  • Straight answers — if a repair isn’t worth it, we’ll tell you.

Our service area

We cover all of Canberra and the surrounding ACT, including Belconnen, Gungahlin, Woden, Tuggeranong, the Inner North and Inner South, Queanbeyan and the town-centre business districts for commercial call-outs.

How it works

  1. Call 0418 811 808 or send the enquiry form with your appliance type and a short description of the problem.
  2. We book a visit — same day where possible.
  3. We diagnose on site and quote before any repair goes ahead.

Dishwasher repair FAQs

Why is there water sitting in the bottom of my dishwasher?
Standing water almost always means a drainage problem — a blocked filter, a kinked or clogged drain hose, or a faulty drain pump. It’s a common and usually straightforward repair once the cause is identified.
Yes. Poor cleaning is usually caused by blocked spray arms, a clogged filter, or a weak wash pump. We check the water flow and heating so the cycle actually cleans again.
Yes — both, across all brands and makes, domestic and commercial.
Yes, wherever we have availability. Call early in the day for the best chance of a same-day booking across the ACT.
We charge a flat service call to attend and diagnose, then quote the repair before doing the work. The service call has no time limit — the price is the same whether the fault takes five minutes or a few hours to find.